Part Finder is temporarily unavailable.

Barra Enthusiasts | OS Auto | Performance Block

AEM High Flow In-Tank Fuel Pump Features:


  • Tested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline

  • Designed for high output naturally aspirated and forced induction EFI vehicles

  • In tank design

  • Each pump is tested to flow 320 lph @ 43 PSI

  • 39mm diameter fits most applications

  • Offset inlet design eases installation

  • Kit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead


--

The AEM E85 Fuel Pump is designed for in-tank installation on high performance naturally aspirated and forced induction vehicles. It flows 320 lph (84 gph) at 43 PSI (please refer to the chart for fuel pump horsepower versus pressure for various applications and fuel types).

AEM's E85 Fuel Pump features robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and has been tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline.

The AEM E85 Fuel Pump features a compact 39mm diameter that fits most applications. It features an offset inlet design that eases installation and includes a wiring harness, pre filter, internal fuel hose and clamps, end cap and rubber buffer sleeve. Every AEM E85 Fuel Pump is tested to flow 320 lph at 43 PSI before it is packaged for sale.

AEM High Flow In-Tank Fuel Pump Features:


  • Tested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline

  • Designed for high output naturally aspirated and forced induction EFI vehicles

  • In tank design

  • Each pump is tested to flow 320 lph @ 43 PSI

  • 39mm diameter fits most applications

  • Offset inlet design eases installation

  • Kit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead


SPECIFICATIONS

  • Weight: 10.1 Ounces

  • Outside Diameter: 39mm

  • External Materials: Black plated steel with laser etching

  • Inlet Fitting: 7.7mm Inside Diameter, 11.0mm Outside Diameter

  • Outlet Fitting: 10 mm Hose Clamp

  • PRV Activation: 90 PSI

  • Impeller Design: Single Scroll Hard Anodized Aluminum Turbine

  • Connector Terminal: 6 mm Spade (positive/negative)

  • Minimum Voltage Input: 6 Volts

  • Maximum Voltage Input: 18 Volts

  • Current Draw (40 psi): 12 amps (13.5v)

  • Current Draw (80 psi): 15 amps (13.5v


TECHNICAL SPECS:

  • Weight: 10.1oz (285grams)

  • Outside Diameter: 39mm OD

  • External Materials: Black plated steel with laser etching, green end caps

  • Inlet Fitting: 7.7mm ID, 11.0mm OD

  • Outlet Fitting: 8 mm hose clamp

  • PRV Activation: 80 PSI

  • Impeller Design: Single Scroll Ceramic Turbine


VOLTAGE SPECS:

  • Connector Terminal: 6 mm Spade (pos/neg)

  • Min Voltage Input: 6 volts

  • Max Voltage Input: 18 volts

  • Current Draw (40 psi): 12 amps (13.5v)

  • Current Draw (80 psi): 15 amps (13.5v)


WHAT'S INCLUDED

  • 1x Fuel Pump

  • 1x Rubber Sleeve

  • End Caps

  • Pre Filter

  • Hose

  • Clamps

  • Flying Lead

See the vehicle fitment details below:

Nothing here? Message us and we will check for you.
Most orders are dispatched before their estimated dispatch date displayed above. However on some occasions, delays may happen. If this happens, we will notify you straight away.

Some products may be shipped via our distributors within Australia, meaning that once the order is placed we forward the order directly to our distributor. Our distributor then ships the part directly to you.

We can not guarantee the stock count from initial order placed, however can provide a stock amount prior to an order placed. Please note, stock availability is subject to change.

Orders may be dispatched in Partial Shipments. Multiple parts in one order may be shipped from different suppliers within Australia.
translation missing: en.general.search.loading